THE CONSTRUCTION AND FABRICATED OF A MOBILE DEEP FREEZER
Sold By: Joe Project Store | Item Type: Project Material | Report this? | Attributes: 65 pages | 1-5 chapters | Amount: ₦5,000 | Marked useful: 4,227 times
Delivery: Within 24 hoursABSTRACT
This work on the construction and fabrication of a mobile deep freezer revolves around the concept of refrigeration. The concept of refrigeration revolves around the reverse Carnot cycle. This is a cycle involving isentropic expansion (at the throttling valve), isothermal expansion (at the evaporator), isentropic compression (at the compressor) and isothermal compressor ( at the condenser) Compression raises the temperatures of the refrigerant above that of its natural surrounding so that it can give up its heat in a heat exchanger to a heat sink such as air or water (condenser). Expansion lowers the refrigerant temperature below the temperature that is to be produced inside the cooling compartment.
TABLE OF CONTENT
Title page
Approval page
Dedication
Acknowledgment
Abstract
Chapter one: Introduction
Chapter Two: Literature Review
Chapter Three: Design Analysis and Calculations
3.1 Determination and choice of condenser and Evaporator temperature.
3.2 Cooling Load Calculation
3.3 Flow Rate
3.3.1 Mass flow rate
3.3.2 Ton of Refrigeration
3.3.3 Volume flow rate
3.4 Determination of Compressor size
3.5 Determination of pipe size and length
3.5.1 Comparing the velocities for different pipe size.
3.5.2 Summary table.
Chapter Four: Construction Details
4.1 Material Selection
4.2 Sequence of operation
4.3 Assembly
Chapter Five: Cost Analysis
Chapter Six: Recommendation
6.1 Maintenance and use Instructions
6.1.1 Condenser Maintenance
6.1.2 Defrosting
6.1.3 Other Instructions
6.1.4 Common Complaints, Causes and Remedy
Chapter Seven: Refrigerants
7.1 Requirements for refrigerants
7.2 Identifying Refrigerants by number
7.3 Halide refrigerants
7.4 Grouping and Classification of refrigerants
7.5 Group one Refrigerants
7.6 R-12 Dichlorodi Fluoromethane (ccl2f2)
7.7 R-22 Monochlorodi fluoromethane (CHCLF2)
7.8 R-11 Trichloromono fluoromethane (CCL3F)
7.9 Azeotropic Mixtures
7.10 R-500 Refrigerant
7.11 R-502 Refrigerant (R-22 + R-115) (CHCLF2/CCLF2 CF3)
7.12 R-503 Refrigerant (R-23 +R-13) (CHF3/CCLF3).
7.13 R-504 Refrigerant (R-32 +R115) (CH2F2 (F3 CCLF2)
7.14 Group two refrigerants
7.15 R- 717 Ammonia (NH3)
7.16 Group three refrigerants
7.17 Expendable Refrigerants
7.18 Water as a Refrigerants
7.19 Refrigerant Cylinders
7.20 Color code for refrigerants cylinders
Chapter Eight: Conclusion
Reference.
This material content is developed to serve as a GUIDE for students to conduct academic research
Find What You Want By Category:
Delivery: Within 24 hours
Advertise Here
For advertisement, call 08168958821
Not what you were looking for? Perform a search
What's your project topic?
Comment on Facebook:
Related Project Materials
- 1.
INVESTIGATION OF THE EFFECT OF MOULDING SAND (NATURAL & SYNTHETIC) ON CASTING OF FLANGE USING ALUMIN...
ABSTRACT This study tend to investigate the effect of synthetic and natural moulding sand on casting of flange like component. In this study FUTA lo...More »
Item Type: Project Material | 50 pages | 13,551 engagements |
- 2.
DESIGN AND FABRICATION OF AN OFFICE FILE CABINET
ABSTRACT This project covers the design and fabrication of an office file cabinet. The cabinet is to keep and secure files and document for future rec...More »
Item Type: Project Material | 50 pages | 12,329 engagements |
- 3.
DESIGN AND FABRICATION OF MECHANCIAL LAWN MOWER
ABSTRACT Mechanical engineering department of the named institute has many non operational machines sequel to this fact mainten...More »
Item Type: Project Material | 50 pages | 10,657 engagements |
- 4.
THE DESIGN AND CONSTRUCTION OF HOT PRINTING MACHINE
ABSTRACT Parameters on which clear prints depends were comprehensively investigated. The study revealed that clear print dep...More »
Item Type: Project Material | 50 pages | 8,507 engagements |
- 5.
THE CONSTRUCTION AND FABRICATION OF METAL BOOKSHEET
ABSTRACT In our society today reading and writing has taken its roll as a way of measuring human knowledge. Knowledge could only be obtain succe...More »
Item Type: Project Material | 50 pages | 8,206 engagements |
- 6.
REPAIR OF AIR CONDITIONER IN MECHANICAL ENGINEERING DEPARTMENT
CHAPTER ONE 1.1 AIR CONDITIONER Indoor climate, once adjusted to human need only by opening of heating in winter and by open...More »
Item Type: Project Material | 50 pages | 8,310 engagements |